Коды ошибок телевизора фирмы Thompson шасси ICC21
ICC21 chassis error codes
| code | name | description (original version) | description (traduction) | |
| 11 | 12C_1 low SDA line | SDA-line low on Bus 1 | ligne donnees bus1 bloquee niveau bas | |
| 12 | 1212C_1 low SCL line | SCL-line low on Bus 1 | ligne horloge bus1 bloquee niveau bas | |
| 13 | 1312C_2 low SDA line | SDA-line low on Bus 2 | ligne donnees bus2 bloquee niveau bas | |
| 14 | 1412C_2 low SCL line | SCL-line low on Bus 2 | ligne horloge bus2 bloquee niveau bas | |
| 15 | 1512C_3 low SDA line | SDA-line low on Bus 3 | ligne donnees bus3 bloquee niveau bas | |
| 16 | 1612C_3 low SCL line | SCL-line low on Bus 3 | ligne horloge bus3 bloquee niveau bas | |
| 17 | 1712C_4 low SDA line | SDA-line low on Bus 4 | ligne donnees bus4 bloquee niveau bas | |
| 18 | 1812C 4 low SCL line | SCL-line low on Bus 4 | ligne horloge bus4 bloquee niveau bas | |
| 21 | Tda9321MainNoAck | The Main HIP does not answer | IC500 ne repond pas | |
| 22 | 22Tda9321Main POR | The POR bit is set in the Main HIP | IC500 detection disjonction alim | |
| 23 | 23Tda9321MainXTAL | The XTAL info of the Main HIP is wrong | IC500 identification du quartz incorrecte | |
| 24 | 24Tda9321Second NoAck | The Second HIP does not answer | IC700 ne repond pas | |
| 25 | 25Tda9321Second POR | The POR bit is set in the Secondary HIP | IC700 detection disjonction alim | |
| 26 | 26Tda9321SecondXTAL | Wrong XTAL info of the Secondary HIP | IC700 identification du quartz incorrecte | |
| 27 | Tea6415cNoAck | Video switch does not answer | IX900 ne repond pas, absence 8V5 | |
| 28 | Tda9178NoAck | The PSI does not answer | IV100 ne repond pas | |
| 29 | Tda9178PDD | The PDD bit is set in the PSI | IV100 detection disjonction alim | |
| 31 | Tda9330NoAck | The HOP does not answer | IV200 ne repond pas | |
| 32 | Tda9330POR | The HOP detect power down | IV200 n'est plus alimente | |
| 33 | Tda9330FLS | The HOP safety input is activated | IV200 entree safety activee | |
| 34 | 34Tda9330NHF | HOP horizontal flyback problem | IV200 probleme de retour ligne | |
| 35 | 35Tda9330NRF | HOP oscillator isn't locked | IV200 probleme verrouillage oscillateur | |
| 36 | BcfWaitTime | Tube Warm Time is longer than specified | le tube n'est pas chaud | |
| 37 | 37Tda9330NDF | The NDF bit is set in the HOP | IV200 probleme balayage vertical | |
| 41 | MspNoAck | The MSP 44xOG does not answer | IA001 ne repond pas | |
| 42 | Dp14519NoAck | The DPL 4519G does not answer | Processeur Dolby ne repond pas | |
| 43 | Mas3528NoAck | The MAS3528E does not answer | Decodeur AC3 ne repond pas | |
| 44 | Tea6422NoAck | The TEA 6422 does not answer | IA180 ne repond pas | |
| 45 | MspWrong | The wrong MSP is fitted | Erreur de reference sur IA001 | |
| 46 | DpIMasNoAck | The Dolby Digital not well connected | Module Dolby mal connecte | |
| 51 | Sda9410NoAck | The Sda9410 does not answer | IU030 ne repond pas | |
| 52 | SDA9206 master NoAck | Master ADC IC does not answer | IU002 ne repond pas | |
| 53 | SDA9206 slave NoAck | Slave ADC IC does not answer | IU003 ne repond pas | |
| 54 | M24C64NoAck | The Nvm does not acknowledge | IR005 ne repond pas | |
| 55 | 55TCE2ACU NoAck | Portexpander IC does not answer | IR006 ne repond pas | |
| 61 | 5vOnFail | 5v not present | Absence 5V | |
| 62 | 625v8vOnFail | 5v and 8v not present | Disjonction du mode ON | |
| 63 | PowerFail | Main power supply failed to switch on | Disjonction par signal Power fail | |
| Codes 81 a 87 specifiqutes au retroprojecteur | ||||
| 81 | STV2050NoAck | The STV2050 does not answer | RP | IK01 ne repond pas |
| 82 | M24C32NoAck | The RP default NVM does not answer | RP | NVM IK07 ne repond pas |
| 83 | M24C32CorruptData | The M24C32 signature is corrupt | RP | NVM IK07 mal programmee |
| 84 | STV2050NoAckButWasRp | The STV2050 does not answer but was an RP before (Flag in Main Nvm is set) | RP sign | IK01 ne repond pas alors que le al board identifie un RP |
| 85 | CvgUnitEeproml DataWrong | The Convergence Eeprom1 data are wrong | RP : Mauvaise programation Eeprom1 | |
| 86 | CvgUnitEeprom2DataWrong | The Convergence Eeprom2 data are wrong | RP : Mauvaise programation Eeprom2 | |
| 87 | 87STV2050LoopBlocked | The STV2050 electrical loop blocked | RP : IK01 non verrouille | |
| 93 | 9312cCell1 | No 12C Cell1 | ||
| 94 | 9412cCell2 | No 12C Ce112 | ||
| 95 | Err NoPortDriverlnst, | Port driver can not be installed | Probleme general sur l'I2C | |
| 96 | Err_NoAdcDriverlnst | ADC driver can not be installed | ||
| 97 | Err_NoAvLinkDriverlnst, | ADC driver can not be installed | ||
| 98 | Err SDRAMTiming, | Problematic SDRAM timing | ||
| 99 | Err WatchDog, | Watchdog hit | ||
